PATIENT DATA EXCHANGE (85)    PACKAGE (9.4)

Name Value
NAME PATIENT DATA EXCHANGE
PREFIX VAQ
DEVELOPER (PERSON/SITE) JRP;JFP;EG;JLU;BOK/ALBANY-ISC
*LOWEST FILE NUMBER 394
*HIGHEST FILE NUMBER 394.88
DEVELOPMENT ISC ALBANY
CLASS National
SHORT DESCRIPTION Module used to manage patient information exchange
VERSION
  1. VERSION:   1.5
    DATE DISTRIBUTED:   2005-11-19 00:00:00
    PATCH APPLICATION HISTORY:
    1. PATCH APPLICATION HISTORY:   24 SEQ #22
      DATE APPLIED:   1997-04-09 00:00:00
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
       
      Once installation of this patch is complete, should your site continue to
      receive Second/Third Period of Service errors, patient data will have to
      be re-Requested/Unsolicited.  This is due to the Period of Service fields
      having a value of null when transmitted.  Routine has been properly
      corrected to include a 'Yes' or 'No' value when transmission occurs.
       
       
      ROUTINE SUMMARY:
      ================
      Below is the routine included in this patch.  The second line of this
      1.  When extracting the PDX*MAS data segment, all data pertaining to the
      routine will look like:
       
          <tab>;;1.5;PATIENT DATA EXCHANGE;**[patch list]**;NOV 17, 1993 
       
       
                                  CHECK^XTSUMBLD results
       
                 ROUTINE NAME   BEFORE PATCH    AFTER PATCH     PATCH LIST
                 =============  =============   ============    ==========
                 VAQDBII1             2772903        2817374      13,24
          patient's PERIOD OF SERVICE was not able to upload using the LD or LF
       
       
             INSTALLATION INSTRUCTIONS
             ==========================
             1.  This patch can be loaded with users on the system. Installation
             will take less than 5 minutes.  Use the INSTALL/CHECK MESSAGE
             option on the PackMan menu.  This option will load the KIDS package
             onto your system.
       
             2.  Review your mapped set.  If any of the routines listed in the
          of the LOAD/EDIT.  Routine VAQDBII1 has been modified to correct this
             ROUTINE SUMMARY section are mapped, they should be removed from the
             mapped set at this time.
       
             3.  From the Kernel Installation and Distribution System Menu,
             Select the Installation menu.
       
             4.  From this menu, you may elect to use the following options
             (when prompted for INSTALL NAME, enter VAQ*1.5*24):
                                                    ==========
       
          problem.  This was reported in NOIS CAN-0595-10112.
             a.  Backup a Transport Global - this option will create a backup
             message of any routines exported with the patch.  It will NOT
             backup any other changes such as DDs or templates.
       
             b.  Compare Transport Global to Current System - this option will
             allow you to view all changes that will be made when the patch is
             installed.  It compares all components of the patch (routines, DDs,
             templates, etc.).
       
             c.  Verify Checksums in Transport Global - this option will allow
       
             you to ensure the integrity of the routines that are in the
             transport global.
       
       
       
             5.  Use the Install Package(s) option and select the package
             VAQ*1.5*24
             ==========
       
             6.  When prompted 'Want to DISABLE Scheduled Options, Menu Options,
       
             and Protocols?  YES//', respond YES.  When prompted to select the
                                             ===
             options you would like to place out of order, enter the following:
       
       
                              VAQ (MENU) MAIN       Patient Data Exchange
                              ===============
       
             7.  MSM sites:  Please ensure you answer YES when asked if you want
             to move the routines to other systems and indicated the appropriate
      IMPORTANT NOTICE:
             CPUs.
       
             8.  If routines were unmapped as part of step 2, they should be
             returned to the mapped set once the installation has run to
             completion.
      =================
      
    2. PATCH APPLICATION HISTORY:   35 SEQ #32
      DATE APPLIED:   2002-01-16 00:00:00
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      Patch VAQ*1.5*35
      This patch also provides a double-check to ensure that no transactions
      are sent to closed sites.  Any such requests will be marked for purge.
      
      NOTE: This patch should be installed during off hours, when user activity
      is at a minimum.  It requires patch VAQ*1.5*29.
      ==========================================================================
       
      ROUTINES:
      The second line of the routine now looks like:
             ;;1.5;PATIENT DATA EXCHANGE;**[patch list]**;NOV 17, 1993
       
       
                   Before        After
      Name       Checksum     Checksum     Patch List
      -----------------------------------------------------------------
      VAQADM50    4268774      5135296     5,35
      VAQEXT01    5668219      6188779     14,35
      VAQUTL97    1499668      1906264     2,9,29,35
      * Checksums produced by CHECK^XTSUMBLD
      
      This patch introduces no new routines.
      NOIS FAV-1001-70165, MWV-1201-20937
      ==========================================================================
       
      INSTALLATION:
      NOTE: This patch should be installed during off hours, when user activity
      is at a minimum.  It requires patch VAQ*1.5*29.
      1.  Users may be on the system during installation of this patch.
      2.  DSM Sites: If any of these routines is mapped, disable mapping for the
          affected routine(s).  
      3.  On the PackMan menu, use the 'INSTALL/CHECK MESSAGE' option.
          This loads the patch into a Transport Global on your system.  
      Test Sites: Fayetteville, AR; Martinsburg, WV
      4.  You do not need to stop TaskMan or the background filer.
          Users may be on the system.
      5.  On the KIDS:Installation menu, use the following options to install
          the Transport Global.
             Verify Checksums in Transport Global
             Print Transport Global
             Compare Transport Global to Current System
             Backup a Transport Global
             Install Package(s)
       Select INSTALL NAME:   VAQ*1.5*35   Loaded from Distribution <date/time>
      
                              ==========
       Install Questions:
       Want KIDS to INHIBIT LOGONs during the install? YES// NO
                                                             ==
       Want to DISABLE Scheduled Options, Menu Options, and Protocols? YES// NO
                                                                             ==
       Enter the Device you want to print the Install messages.
       You can queue the install by enter a 'Q' at the device prompt.
       Enter a '^' to abort the install.
       
      This patch prevents the option VAQ PDX PROCESS EXTERNAL from displaying
       DEVICE: HOME// <It's up to you.  You may queue it if you wish.>
                      ------------------------------------------------
      6.  DSM Sites: After patch has installed, rebuild your map set, if
          necessary.
      ==========================================================================
      to the user any external requests from closed sites.  Any such requests
      will be marked for purge.
      
      
    3. PATCH APPLICATION HISTORY:   37 SEQ #33
      DATE APPLIED:   2002-01-16 00:00:00
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      Patch VAQ*1.5*37
      
      NOTE: This patch should be installed during off hours, when user activity
      is at a minimum.  It has no patch prerequisite.
      ==========================================================================
       
      ROUTINES:
      The second line of the routine now looks like:
             ;;1.5;PATIENT DATA EXCHANGE;**[patch list]**;NOV 17, 1993
       
                   Before        After
       
      Name       Checksum     Checksum     Patch List
      -----------------------------------------------------------------
      VAQUTL96     370770       419526     37
      * Checksums produced by CHECK^XTSUMBLD
      
      This patch introduces no new routines.
      ==========================================================================
       
      INSTALLATION:
      NOTE: This patch should be installed during off hours, when user activity
      NOIS MAD-1201-42417
      is at a minimum.  It has no patch prerequisite.
      1.  Users may be on the system during installation of this patch.
      2.  DSM Sites: If any of these routines is mapped, disable mapping for the
          affected routine(s).  
      3.  On the PackMan menu, use the 'INSTALL/CHECK MESSAGE' option.
          This loads the patch into a Transport Global on your system.  
      4.  You do not need to stop TaskMan or the background filer.
          Users may be on the system.
      5.  On the KIDS:Installation menu, use the following options to install
          the Transport Global.
      Test Site: Madison, WI
             Verify Checksums in Transport Global
             Print Transport Global
             Compare Transport Global to Current System
             Backup a Transport Global
             Install Package(s)
       Select INSTALL NAME:   VAQ*1.5*37   Loaded from Distribution <date/time>
                              ==========
       Install Questions:
       Want KIDS to INHIBIT LOGONs during the install? YES// NO
                                                             ==
      
       Want to DISABLE Scheduled Options, Menu Options, and Protocols? YES// NO
                                                                             ==
       Enter the Device you want to print the Install messages.
       You can queue the install by enter a 'Q' at the device prompt.
       Enter a '^' to abort the install.
       
       DEVICE: HOME// <It's up to you.  You may queue it if you wish.>
                      ------------------------------------------------
      6.  DSM Sites: After patch has installed, rebuild your map set, if
          necessary.
      If two (or more) PDX patients share the same first initial of the last name
      ==========================================================================
      and the same last 4 digits of the SSN, PDX will only show the first patient
      when attempting to Load/Edit PDX Transactions based on patient name.
      This patch fixes that.
      
    4. PATCH APPLICATION HISTORY:   36 SEQ #34
      DATE APPLIED:   2002-02-04 00:00:00
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      Patch VAQ*1.5*36
      corrupted .01 fields will not adversely affect NHE or any its data.
      
      NOTE: This patch should be installed during off hours, when user activity
      is at a minimum.  It requires patch VAQ*1.5*34.
      ==========================================================================
       
      ROUTINES:
      The second line of the routine now looks like:
             ;;1.5;PATIENT DATA EXCHANGE;**[patch list]**;NOV 17, 1993
       
       
                   Before        After
      Name       Checksum     Checksum     Patch List
      -----------------------------------------------------------------
      VAQUTL92    2986759      2983392     6,36
      * Checksums produced by CHECK^XTSUMBLD
      
      This patch introduces no new routines.
      ==========================================================================
       
      INSTALLATION:
      NOIS ANC-1201-51582
      NOTE: This patch should be installed during off hours, when user activity
      is at a minimum.  It requires patch VAQ*1.5*34.
      1.  Users may be on the system during installation of this patch.
      2.  DSM Sites: If any of these routines is mapped, disable mapping for the
          affected routine(s).  
      3.  On the PackMan menu, use the 'INSTALL/CHECK MESSAGE' option.
          This loads the patch into a Transport Global on your system.  
      4.  You do not need to stop TaskMan or the background filer.
          Users may be on the system.
      5.  On the KIDS:Installation menu, use the following options to install
      Test Site: Anchorage, AK
          the Transport Global.
             Verify Checksums in Transport Global
             Print Transport Global
             Compare Transport Global to Current System
             Backup a Transport Global
             Install Package(s)
       Select INSTALL NAME:   VAQ*1.5*36   Loaded from Distribution <date/time>
                              ==========
       Install Questions:
       Want KIDS to INHIBIT LOGONs during the install? YES// NO
      
                                                             ==
       Want to DISABLE Scheduled Options, Menu Options, and Protocols? YES// NO
                                                                             ==
       Enter the Device you want to print the Install messages.
       You can queue the install by enter a 'Q' at the device prompt.
       Enter a '^' to abort the install.
       
       DEVICE: HOME// <It's up to you.  You may queue it if you wish.>
                      ------------------------------------------------
      6.  DSM Sites: After patch has installed, rebuild your map set, if
      Patch VAQ*1.5*30 caused some corrupted .01 fields in file 394.62.  Patch
          necessary.
      ==========================================================================
      VAQ*1.5*34 stopped further corruption.  (Please see the description in
      patch VAQ*1.5*34 for an explanation of the corruption.)  The corruption
      cannot be undone, but it can be ignored.  This patch ensures that the
      
    5. PATCH APPLICATION HISTORY:   38 SEQ #35
      DATE APPLIED:   2002-09-06 00:00:00
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      Patch VAQ*1.5*38
      NOTE: This patch should be installed during off hours, when user activity
      is at a minimum.  It has no patch prerequisite.
      ==========================================================================
       
      ROUTINES:
      The second line of the routine now looks like:
             ;;1.5;PATIENT DATA EXCHANGE;**[patch list]**;NOV 17, 1993
       
                   Before        After
      Name       Checksum     Checksum     Patch List
       
      -----------------------------------------------------------------
      VAQDBIM     4078867      4144431     38
      VAQDBIM4    3774719      4191649     38
      * Checksums produced by CHECK^XTSUMBLD
      
      This patch introduces no new routines.
      ==========================================================================
       
      INSTALLATION:
      NOTE: This patch should be installed during off hours, when user activity
      NOIS MAD-1001-42696
      is at a minimum.  It has no patch prerequisite.
      1.  Users may be on the system during installation of this patch.
      2.  DSM Sites: If any of these routines is mapped, disable mapping for the
          affected routine(s).  
      3.  On the PackMan menu, use the 'INSTALL/CHECK MESSAGE' option.
          This loads the patch into a Transport Global on your system.  
      4.  You do not need to stop TaskMan or the background filer.
          Users may be on the system.
      5.  On the KIDS:Installation menu, use the following options to install
          the Transport Global.
      Test Sites: Madison, WI; Milwaukee, WI; Tomah, WI; Iron Mountain, MI
             Verify Checksums in Transport Global
             Print Transport Global
             Compare Transport Global to Current System
             Backup a Transport Global
             Install Package(s)
       Select INSTALL NAME:   VAQ*1.5*38   Loaded from Distribution <date/time>
                              ==========
       Install Questions:
       Want KIDS to INHIBIT LOGONs during the install? YES// NO
                                                             ==
      
       Want to DISABLE Scheduled Options, Menu Options, and Protocols? YES// NO
                                                                             ==
       Enter the Device you want to print the Install messages.
       You can queue the install by enter a 'Q' at the device prompt.
       Enter a '^' to abort the install.
       
       DEVICE: HOME// <It's up to you.  You may queue it if you wish.>
                      ------------------------------------------------
      6.  DSM Sites: After patch has installed, rebuild your map set, if
          necessary.
      If a veteran declines to give income information, PDX should display the
      ==========================================================================
      means test as CAT C.  Instead, PDX may display it as CAT A.  This patch
      fixes that.
      
      
    6. PATCH APPLICATION HISTORY:   39 SEQ #36
      DATE APPLIED:   2002-10-25 00:00:00
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      Patch VAQ*1.5*39
      unnecessary and are probably the cause of the problems.  After the patch
      is installed, duplicate transaction numbers should no longer be created.
      Feel free to delete the pre-init, ^VAQPRE39, after installation.
      
      NOTE: This patch should be installed during off hours, when user activity
      is at a minimum.  It has no patch prerequisite.
      ==========================================================================
       
      ROUTINES:
      The second line of the routine now looks like:
       
             ;;1.5;PATIENT DATA EXCHANGE;**[patch list]**;NOV 17, 1993
       
                   Before        After
      Name       Checksum     Checksum     Patch List
      -----------------------------------------------------------------
      VAQPRE39    * NEW *       268564     39
      * Checksums produced by CHECK^XTSUMBLD
      
      This patch introduces the following new routine:
      VAQPRE39 has no user-callable entry points and may be deleted after the
      NOIS TNV-0902-30675 (Remedy Ticket HD8627/CHG2933)
      patch has been installed.
      ==========================================================================
       
      INSTALLATION:
      NOTE: This patch should be installed during off hours, when user activity
      is at a minimum.  It has no patch prerequisite.
      1.  Users may be on the system during installation of this patch.
      2.  DSM Sites: If any of these routines is mapped, disable mapping for the
          affected routine(s).  
      3.  On the PackMan menu, use the 'INSTALL/CHECK MESSAGE' option.
      Test Sites: Tennessee Valley HCS
          This loads the patch into a Transport Global on your system.  
      4.  You do not need to stop TaskMan or the background filer.
          Users may be on the system.
      5.  On the KIDS:Installation menu, use the following options to install
          the Transport Global.
             Verify Checksums in Transport Global
             Print Transport Global
             Compare Transport Global to Current System
             Backup a Transport Global
             Install Package(s)
      
       Select INSTALL NAME:   VAQ*1.5*39   Loaded from Distribution <date/time>
                              ==========
       Install Questions:
       Want KIDS to INHIBIT LOGONs during the install? YES// NO
                                                             ==
       Want to DISABLE Scheduled Options, Menu Options, and Protocols? YES// NO
                                                                             ==
       Enter the Device you want to print the Install messages.
       You can queue the install by enter a 'Q' at the device prompt.
       Enter a '^' to abort the install.
      Duplicate transaction numbers in file VAQ - TRANSACTION (#394.61) continue
       
       DEVICE: HOME// <It's up to you.  You may queue it if you wish.>
                      ------------------------------------------------
      6.  DSM Sites: After patch has installed, rebuild your map set, if
          necessary.
      ==========================================================================
      to be a problem.  The pre-init for this patch deletes the triggers on the
      TRANSACTION NUMBER (#.01) field in file VAQ - TRANSACTION (#394.61) and
      DATA (#.01) field in file VAQ - DATA (#394.62).  These triggers are
      
    7. PATCH APPLICATION HISTORY:   40 SEQ #37
      DATE APPLIED:   2003-02-04 00:00:00
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      Patch VAQ*1.5*40
      NOTE: This patch should be installed during off hours, when user activity
      is at a minimum.  It requires PDX patches VAQ*1.5*22 and *24.  KIDS will
      not check for the existence of these patches, because they pre-date KIDS.
      The site is responsible for performing the check.
      ==========================================================================
       
      ROUTINES:
      The second line of the routine now looks like:
             ;;1.5;PATIENT DATA EXCHANGE;**[patch list]**;NOV 17, 1993
       
       
                   Before        After
      Name       Checksum     Checksum     Patch List
      -----------------------------------------------------------------
      VAQDBII1    2817374      2861649     13,24,40
      VAQDIS30    5471356      6429479     13,22,40
      * Checksums produced by CHECK^XTSUMBLD
      
      This patch introduces no new routines.
      ==========================================================================
       
      NOIS MAD-0103-41237
      INSTALLATION:
      NOTE: This patch should be installed during off hours, when user activity
      is at a minimum.  It requires PDX patches VAQ*1.5*22 and *24.  KIDS will
      not check for the existence of these patches, because they pre-date KIDS.
      The site is responsible for performing the check.
      1.  Users may be on the system during installation of this patch.
      2.  DSM Sites: If any of these routines is mapped, disable mapping for the
          affected routine(s).  
      3.  On the PackMan menu, use the 'INSTALL/CHECK MESSAGE' option.
          This loads the patch into a Transport Global on your system.  
      Test Sites: Madison, Milwaukee, Tomah, & Iron Mtn
      4.  You do not need to stop TaskMan or the background filer.
          Users may be on the system.
      5.  On the KIDS:Installation menu, use the following options to install
          the Transport Global.
             Verify Checksums in Transport Global
             Print Transport Global
             Compare Transport Global to Current System
             Backup a Transport Global
             Install Package(s)
       Select INSTALL NAME:   VAQ*1.5*40   Loaded from Distribution <date/time>
      
                              ==========
       Install Questions:
       Want KIDS to INHIBIT LOGONs during the install? YES// NO
                                                             ==
       Want to DISABLE Scheduled Options, Menu Options, and Protocols? YES// NO
                                                                             ==
       Enter the Device you want to print the Install messages.
       You can queue the install by enter a 'Q' at the device prompt.
       Enter a '^' to abort the install.
       
      This patch adds Yugoslavia service and Purple Heart information to the
       DEVICE: HOME// <It's up to you.  You may queue it if you wish.>
                      ------------------------------------------------
      6.  DSM Sites: After patch has installed, rebuild your map set, if
          necessary.
      ==========================================================================
      PDX*MAS data which PDX extracts from the PATIENT file and displays on
      screen 6.
      
      
    8. PATCH APPLICATION HISTORY:   43 SEQ #38
      DATE APPLIED:   2004-08-02 00:00:00
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      This patch will prevent a new patient from being added to the Patient (#2)
      file if an existing patient with the same SSN exists.  It also corrects a
      DR variable leak.
      
    9. PATCH APPLICATION HISTORY:   42 SEQ #39
      DATE APPLIED:   2005-02-04 00:00:00
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      Patch VAQ*1.5*42
      NOTE: This patch should be installed during off hours, when user activity
      is at a minimum.  It requires patch IB*2.0*267.  It also requires patch
      VAQ*1.5*13.  (KIDS will not check for this patch because it predates KIDS.
      You must check manually.)
      ==========================================================================
       
      ROUTINES:
      The second line of the routine now looks like:
             ;;1.5;PATIENT DATA EXCHANGE;**[patch list]**;NOV 17, 1993
       
       
                   Before        After
      Name       Checksum     Checksum     Patch List
      -----------------------------------------------------------------
      VAQDBIP7    3165540     11036802     13,42
      
      * Checksums produced by CHECK^XTSUMBLD
      
      This patch introduces no new routines.
      ==========================================================================
       
      NOIS: none
      INSTALLATION:
      NOTE: This patch should be installed during off hours, when user activity
      is at a minimum.  It requires patch IB*2.0*267.  It also requires patch
      VAQ*1.5*13.  (KIDS will not check for this patch because it predates KIDS.
      You must check manually.)
      1.  Users may be on the system during installation of this patch.
      2.  DSM Sites: If any of these routines is mapped, disable mapping for the
          affected routine(s).  
      3.  On the PackMan menu, use the 'INSTALL/CHECK MESSAGE' option.
          This loads the patch into a Transport Global on your system.  
      Test Sites: Oklahoma City, OK; Madison, WI; Milwaukee, WI; Tomah, WI;
      4.  You do not need to stop TaskMan.
          Users may be on the system.
      5.  On the KIDS:Installation menu, use the following options to install
          the Transport Global.
             Verify Checksums in Transport Global
             Print Transport Global
             Compare Transport Global to Current System
             Backup a Transport Global
             Install Package(s)
       Select INSTALL NAME:   VAQ*1.5*42   Loaded from Distribution <date/time>
                  Montana HCS
                              ==========
       Install Questions:
       Want KIDS to INHIBIT LOGONs during the install? YES// NO
                                                             ==
       Want to DISABLE Scheduled Options, Menu Options, and Protocols? YES// NO
                                                                             ==
       Enter the Device you want to print the Install messages.
       You can queue the install by enter a 'Q' at the device prompt.
       Enter a '^' to abort the install.
       
      
       DEVICE: HOME// <It's up to you.  You may queue it if you wish.>
                      ------------------------------------------------
      6.  DSM Sites: After patch has installed, rebuild your map set, if
          necessary.
      ==========================================================================
      This patch alters PDX to use the new API from IB (Integrated Billing),
      introduced in patch IB*2.0*256, to access billing (insurance) data.
      
      
    10. PATCH APPLICATION HISTORY:   41 SEQ #40
      DATE APPLIED:   2005-06-25 00:00:00
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      Patch VAQ*1.5*41. Please refere to the Description in Forum Patch Module 
      for details.
      
    11. PATCH APPLICATION HISTORY:   44 SEQ #41
      DATE APPLIED:   2014-01-08 15:25:50
      APPLIED BY:   USER,SEVENTEEN
      DESCRIPTION:   
      This patch addresses 2 issues with Patient Data Exchange (PDX):
       
      1) Issues adding users to notify for PDX transactions  
      2) <UNDEFINED> errors occurring due to invalid Health Summary
         Component entries.
      
    12. PATCH APPLICATION HISTORY:   26 SEQ #24
      DATE APPLIED:   1999-12-10 00:00:00
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      1. Y2K Waiver Request ID#:Y2KW0001     Y2K Waiver Status: Approved
         until creation of IEN and Transaction number.
       
       
      Test Sites:
      ==========
      Brockton, MA - 525
      Nashville, TN - 626 
      Eastern Kansas HCS - 677
       
       
         This patch may be installed during the Y2K Moratorium, either
       
      Routine Summary:
      ===============
      The following routine(s) are included in this patch.  The second line of
      each routine will look like:
       
       <tab>;;1.5;PATIENT DATA EXCHANGE;**[Patch List}**;Nov 17, 1993
       
      Checksums:  CHECK^XTSUMBLD
      =========
         BEFORE 12/15/99 or AFTER 1/15/2000.  This patch MAY NOT be
       
      Rtn Nm          Chksum Before          Chksum         Patch List
      ------------------------------------------------------------------
      VAQFILE               3704729         3884670            22,26
      VAQREQ06              5069886         4782978        4,16,20,22,26
       
       
      Installation Instruction:
      ========================
      1. This patch can be loaded with users on the system.
         installed between 12/15/99 and 1/15/2000(the Y2K Lockdown Period).
       
      2. Routine mapping is NOT recommended for these routines.  If you are
      using routine mapping, review your mapped set and ensure that these
      routines are NOT in your mapped routine before proceeding and rebuild
      your map set afterward before reactivating TaskMan.
       
      3. Use the "INSTALL/CHECK MESSAGE" option on the PackMan menu.  This
      will load the KIDS package into your system.
       
      4. The patch has now been loaded into a transport global and you will
       
      use KIDS to install the transport global.  On the KIDS menu, under the
      'Installation' menu, use the following options
       
         2 Verify Checksums in Transport Global
         3 Print Transport Global
         4 Compare Transport Global to Current System
         5 Backup a Transport Global
         6 Install Package(s)
                   INSTALL NAME:  VAQ*1.5*26
                                  ==========
         BRK-0596-12069,EKH-0498-42577,EKH-1298-40432,NAS-0998-32328.
       
        Want KIDS to INHIBIT LOGONs during the install? YES// NO
                                                              ==
        Want to DISABLE Scheduled Options, Menu Options, and Protocols? NO
                                                                        ==
       
      5. If routines were unmapped as part of step 2, they should be returned
      to the mapped set once the installation has run to completion.
         Several sites have indicated that VAQ-TRANSACTION FILE(394.61)
         periodically creates duplicate Transaction numbers.  Routines
         VAQFILE and VAQREQ06 have been revised to ensure Lock of file
      
    13. PATCH APPLICATION HISTORY:   28 SEQ #25
      DATE APPLIED:   2000-02-29 00:00:00
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      1. Y2K Waiver Exemption ID#:Y2KWE0034
       
      Test Sites:
      ==========
      Cleveland, OH     - 541
      Columbus, OH(OPC) - 757
       
       
       
      Routine Summary:
      ===============
         This patch may be installed at any time during the Y2K Moratorium
      The following routine(s) are included in this patch.  The second line of
      each routine will look like:
       
       <tab>;;1.5;PATIENT DATA EXCHANGE;**[Patch List}**;Nov 17, 1993
       
      Checksums:  CHECK^XTSUMBLD
      =========
       
      Rtn Nm          Chksum Before          Chksum         Patch List
      ------------------------------------------------------------------
         (including the 12/15/99 thru 1/15/2000 Y2K lockdown).
      VAQFILE               3884670           3917792        22,26,28
       
       
      Installation Instruction:
      ========================
      1. This patch can be loaded with users on the system.
       
      2. Routine mapping is NOT recommended for these routines.  If you are
      using routine mapping, review your mapped set and ensure that these
      routines are NOT in your mapped routine before proceeding and rebuild
       
      your map set afterward before reactivating TaskMan.
       
      3. Use the "INSTALL/CHECK MESSAGE" option on the PackMan menu.  This
      will load the KIDS package into your system.
       
      4. The patch has now been loaded into a transport global and you will
      use KIDS to install the transport global.  On the KIDS menu, under the
      'Installation' menu, use the following options
       
         2 Verify Checksums in Transport Global
         CLE-1199-42576,COS-1299-40012.
         3 Print Transport Global
         4 Compare Transport Global to Current System
         5 Backup a Transport Global
         6 Install Package(s)
                   INSTALL NAME:  VAQ*1.5*28
                                  ==========
       
        Want KIDS to INHIBIT LOGONs during the install? YES// NO
                                                              ==
        Want to DISABLE Scheduled Options, Menu Options, and Protocols? NO
         Several sites has indicated that PDX is unable to store data into
                                                                        ==
       
      5. If routines were unmapped as part of step 2, they should be returned
      to the mapped set once the installation has run to completion.
         workload file #394.87, due to an undefine variable error.  Routine
         VAQFILE has been revised to correct this problem.
       
      
    14. PATCH APPLICATION HISTORY:   29 SEQ #26
      DATE APPLIED:   2000-11-06 00:00:00
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
       
       
       Description:
       ============
          NOIS: ISA-0700-12514, NOL-0700-72818
       
              Sites had reported that PDX is generating error
          messages because of unable to find the correct
          Domain name from the Domain file.  The problem that
          is causing this is that the pointer is using B
          cross reference.  Routines are modified to point at
       
          C cross reference.
       
       
        List of Test Sites:
        ==================
          New Orleans, Montana
       
       
       
        ROUTINE SUMMARY                                                  
       Subject:
        ===============                                                  
               
         The following routines are included in this patch.  The
         second line of each of these routines now looks like:                  
       
         <tab>;;1.5;PATIENT DATA EXCHANGE;**[patch list**; Date
       
               
          Routine Name     Chksum Before    Chksum After      Patch List
          ------------     -------------    ------------      ----------
          Correcting wrong cross reference
          VAQUTL97         1469891          1499668           2,9,29
          VAQUTL99         2220508          2284414           2,10,29
       
       
          * From CHECK^XTSUMBLD
       
       
       
       
        Installation Instructions:
       
        ==========================
       
           1. Users ARE allowed to be on the system during the installation.
       
           2. DSM/AXP sites: Review your mapped routine set.  If any of the
              routines in the Routine Summary section are mapped, disable
              mapping for the affected routine.
       
           3. Use the "INSTALL/CHECK MESSAGE" option on the PackMan menu.
              This loads the patch into a Transport Global onto your system.
       
          
           4. You DO NOT need to stop TaskMan or the background filers.
                    
           5. On the KIDS menu, select the "Installation" menu and use the
              following options to install the Transport Global:
                 Verify Checksums in Transport Global
                 Print Transport Global 
                 Compare Transport Global to Current System
                 Backup a Transport Global
       
       Category:
                 Install Package(s) 
                     INSTALL NAME: VAQ*1.5*29
                                   ==========
       
                 Want KIDS to INHIBIT LOGONs during the install?  YES// NO
                                                                       ==== 
                 Want to DISABLE Scheduled Options,  Menu Options, and
                   Protocols?  NO//
                               ==
       
          Routine
       
           6.  DSM/AXP Sites - Answer NO to the question "Want to MOVE
                routines to other CPUs?"
       
           7.  DSM/AXP sites:  If the routines were unmapped, the mapped
               set should be rebuilt once the installation has run
               to completion.
       
       
      .
       
      
    15. PATCH APPLICATION HISTORY:   32 SEQ #27
      DATE APPLIED:   2001-11-06 00:00:00
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      Patch VAQ*1.5*32
      NOTE: This patch should be installed during off hours, when user activity
      is at a minimum.  It requires patch VAQ*1.5*28.
      ==========================================================================
       
      ROUTINES:
      The second line of the routine now looks like:
             ;;1.5;PATIENT DATA EXCHANGE;**[patch list]**;NOV 17, 1993
       
                   Before        After
      Name       Checksum     Checksum     Patch List
       
      -----------------------------------------------------------------
      VAQFILE     3917792      3972067     22,26,28,32
      VAQREQ06    4782978      4486600     4,20,26,32
      * Checksums produced by CHECK^XTSUMBLD
       
      This patch introduces no new routines.
      ==========================================================================
       
      INSTALLATION:
      NOTE: This patch should be installed during off hours, when user activity
      NOIS CLE-0701-40883
      is at a minimum.  It requires patch VAQ*1.5*28.
      1.  Users may be on the system during installation of this patch.
      2.  DSM Sites: If any of these routines is mapped, disable mapping for the
          affected routine(s).  
      3.  On the PackMan menu, use the 'INSTALL/CHECK MESSAGE' option.
          This loads the patch into a Transport Global on your system.  
      4.  You do not need to stop TaskMan or the background filer.
          Users may be on the system.
      5.  On the KIDS:Installation menu, use the following options to install
          the Transport Global.
      Test Site: Cleveland, OH
             Verify Checksums in Transport Global
             Print Transport Global
             Compare Transport Global to Current System
             Backup a Transport Global
             Install Package(s)
       Select INSTALL NAME:   VAQ*1.5*32   Loaded from Distribution <date/time>
                              ==========
       Install Questions:
       Want KIDS to INHIBIT LOGONs during the install? YES// NO
                                                             ==
      
       Want to DISABLE Scheduled Options, Menu Options, and Protocols? YES// NO
                                                                             ==
       Enter the Device you want to print the Install messages.
       You can queue the install by enter a 'Q' at the device prompt.
       Enter a '^' to abort the install.
       
       DEVICE: HOME// <It's up to you.  You may queue it if you wish.>
                      ------------------------------------------------
      6.  DSM Sites: After patch has installed, rebuild your map set, if
          necessary.
      This patch stops PDX from locking file 394.61 when $$NEWTRAN^VAQFILE is
      ==========================================================================
      called to add a new record to the file.  ^DIC provides the appropriate
      locking, so PDX doesn't have to.
       
      
    16. PATCH APPLICATION HISTORY:   31 SEQ #28
      DATE APPLIED:   2001-11-21 00:00:00
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      Patch VAQ*1.5*31
      Adverse Reaction Tracking released a patch, GMRA*4*10, which changed the
      data returned by EN1^GMRADPT if the patient has NKA.
      
      Before the patch, the API returned:
      GMRAL=0
      GMRAL(<ptr to file 120.8>)=DFN_"^NKA^0^1"
      
      After the patch, the API returned:
      GMRAL=0
      
       
      PDX used to grab "NKA" from the GMRAL array.  After GMRA*4*10, there was
      nothing to grab.  This patch, VAQ*1.5*31, ensures that PDX recognizes that
      GMRAL=0 means "NKA".
       
      NOTE: This patch should be installed during off hours, when user activity
      is at a minimum.  It has no patch pre-requisite requirement.
      ==========================================================================
       
      ROUTINES:
      The second line of the routine now looks like:
      NOIS ISL-1198-52170
             ;;1.5;PATIENT DATA EXCHANGE;**[patch list]**;NOV 17, 1993
       
                   Before        After
      Name       Checksum     Checksum     Patch List
      -----------------------------------------------------------------
      VAQDBIP1    4400113      5323185     31
      * Checksums produced by CHECK^XTSUMBLD
       
      This patch introduces no new routines.
      ==========================================================================
      Test Site: Oklahoma City
       
      INSTALLATION:
      NOTE: This patch should be installed during off hours, when user activity
      is at a minimum.  It has no patch pre-requisite requirement.
      1.  Users may be on the system during installation of this patch.
      2.  DSM Sites: If any of these routines is mapped, disable mapping for the
          affected routine(s).  
      3.  On the PackMan menu, use the 'INSTALL/CHECK MESSAGE' option.
          This loads the patch into a Transport Global on your system.  
      4.  You do not need to stop TaskMan or the background filer.
      
          Users may be on the system.
      5.  On the KIDS:Installation menu, use the following options to install
          the Transport Global.
             Verify Checksums in Transport Global
             Print Transport Global
             Compare Transport Global to Current System
             Backup a Transport Global
             Install Package(s)
       Select INSTALL NAME:   VAQ*1.5*31   Loaded from Distribution <date/time>
                              ==========
      This patch enables PDX to recognize and report on NKA (No Known Allergy)
       Install Questions:
       Want KIDS to INHIBIT LOGONs during the install? YES// NO
                                                             ==
       Want to DISABLE Scheduled Options, Menu Options, and Protocols? YES// NO
                                                                             ==
       Enter the Device you want to print the Install messages.
       You can queue the install by enter a 'Q' at the device prompt.
       Enter a '^' to abort the install.
       
       DEVICE: HOME// <It's up to you.  You may queue it if you wish.>
      when using the API EN1^GMRADPT, provided by the Adverse Reaction Tracking
                      ------------------------------------------------
      6.  DSM Sites: After patch has installed, rebuild your map set, if
          necessary.
      ==========================================================================
      package.
      
      
    17. PATCH APPLICATION HISTORY:   30 SEQ #29
      DATE APPLIED:   2001-11-21 00:00:00
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
              * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * 
           HIN-0701-42706, OKL-0701-70784
      Test Sites: Oklahoma City, OK; Asheville, NC; Central Plains HCS
      
      This patch prevents the sending of PDX messages to closed domains in two
      ways.
      
      1. Prevents the addition of closed domains to outgoing groups:
      Screens are placed on 2 fields in the REMOTE FACILITY multiple
      in file 394.83, VAQ - OUTGOING GROUP.  The fields are .01 REMOTE FACILITY
      and .02 REMOTE DOMAIN.  For both of these, the DOMAIN file is checked
              This patch requires PDX patch VAQ*1.5*22.  KIDS will not check
      to ensure that the domain is not closed.  If it is, the screen fails
      and you are prevented from adding the remote facility to the outgoing group.
      
      2. Removes closed domains from outgoing groups:
      When PDX messages to outgoing groups are being built, the DOMAIN file is
      checked to ensure that the domain is not closed.  If it is, the remote
      facility is deleted from the outgoing group, and the PDX message is not
      sent to that domain.
       
      NOTE: This patch should be installed during off hours, when user activity
                for the existence of this patch, because it pre-dates KIDS.
      is at a minimum.  It requires PDX patch VAQ*1.5*22.  KIDS will not check
      for the existence of this patch, because it pre-dates KIDS.  The site is
      responsible for performing the check.
      ==========================================================================
       
      ROUTINES:
      The second line of the routine now looks like:
             ;;1.5;PATIENT DATA EXCHANGE;**[patch list]**;NOV 17, 1993
       
                   Before        After
                    The site is responsible for performing the check.
      Name       Checksum     Checksum     Patch List
      -----------------------------------------------------------------
      VAQREQ03    3858669      4459512     22,30
      VAQREQ05    4065406      4263629     30
      VAQXRF2     2617277      3203802     30
      * Checksums produced by CHECK^XTSUMBLD
       
      This patch introduces no new routines.
      ==========================================================================
       
              * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * 
      INSTALLATION:
      NOTE: This patch should be installed during off hours, when user activity
      is at a minimum.  It requires PDX patch VAQ*1.5*22.  KIDS will not check
      for the existence of this patch, because it pre-dates KIDS.  The site is
      responsible for performing the check.
      1.  Users may be on the system during installation of this patch.
      2.  DSM Sites: If any of these routines is mapped, disable mapping for the
          affected routine(s).  
      3.  On the PackMan menu, use the 'INSTALL/CHECK MESSAGE' option.
          This loads the patch into a Transport Global on your system.  
      
      4.  You do not need to stop TaskMan or the background filer.
          Users may be on the system.
      5.  On the KIDS:Installation menu, use the following options to install
          the Transport Global.
             Verify Checksums in Transport Global
             Print Transport Global
             Compare Transport Global to Current System
             Backup a Transport Global
             Install Package(s)
       Select INSTALL NAME:   VAQ*1.5*30   Loaded from Distribution <date/time>
      Patch VAQ*1.5*30
                              ==========
       Install Questions:
       Want KIDS to INHIBIT LOGONs during the install? YES// NO
                                                             ==
       Want to DISABLE Scheduled Options, Menu Options, and Protocols? YES// NO
                                                                             ==
       Enter the Device you want to print the Install messages.
       You can queue the install by enter a 'Q' at the device prompt.
       Enter a '^' to abort the install.
       
       
       DEVICE: HOME// <It's up to you.  You may queue it if you wish.>
                      ------------------------------------------------
      6.  DSM Sites: After patch has installed, rebuild your map set, if
          necessary.
      ==========================================================================
      NOIS CHY-0201-51534, ASH-0501-32739, CPH-0501-40775, BHS-0601-10382,
      
    18. PATCH APPLICATION HISTORY:   34 SEQ #30
      DATE APPLIED:   2001-12-10 00:00:00
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      Patch VAQ*1.5*34
      It is evidenced by the following:
      
      >D ^%G
      
      Global ^VAT(394.86
              VAT(394.86
      ^VAT(394.86,0) = VAQ - AUTO-NUMBERING^394.86^1^1
      ^VAT(394.86,1,0) = 1
      ^VAT(394.86,1,1) = 390
      ^VAT(394.86,1,2) = "1"  <----- corrupted
       
      ^VAT(394.86,1,3) = 8
      ^VAT(394.86,"B",1,1) = 
      
      and by:
      
      Global ^VAT(394.62,466
              VAT(394.62,466
      ^VAT(394.62,466,0) = "1"  <----- corrupted
        ...
      ^VAT(394.62,"B","""1""",466) =  <----- corrupted
      NOIS BIR-1101-31486
      
      This patch fixes that, and cleans up the corruption in file 394.86.
      It can't fix PDXs which were adversely affected.  It can't fix file 394.62.
      The PDXs will have to be resent, or the data entered manually, if necessary.
      
      NOTE: This patch should be installed during off hours, when user activity
      is at a minimum.  It requires patch VAQ*1.5*30.
      ==========================================================================
       
      ROUTINES:
      Test Site: Birmingham, AL
      The second line of the routine now looks like:
             ;;1.5;PATIENT DATA EXCHANGE;**[patch list]**;NOV 17, 1993
       
                   Before        After
      Name       Checksum     Checksum     Patch List
      -----------------------------------------------------------------
      VAQFILE1    4265693      4507302     22,34
      VAQPRE34    * NEW *       148728     34
      * Checksums produced by CHECK^XTSUMBLD
      
      
      This patch introduces the following new routine:
      VAQPRE34 - pre-init has no user-callable entry points
      ==========================================================================
       
      INSTALLATION:
      NOTE: This patch should be installed during off hours, when user activity
      is at a minimum.  It requires patch VAQ*1.5*30.
      1.  Users may be on the system during installation of this patch.
      2.  DSM Sites: If any of these routines is mapped, disable mapping for the
          affected routine(s).  
      Patch VAQ*1.5*30 exposed a problem which was not caught during its
      3.  On the PackMan menu, use the 'INSTALL/CHECK MESSAGE' option.
          This loads the patch into a Transport Global on your system.  
      4.  You do not need to stop TaskMan or the background filer.
          Users may be on the system.
      5.  On the KIDS:Installation menu, use the following options to install
          the Transport Global.
             Verify Checksums in Transport Global
             Print Transport Global
             Compare Transport Global to Current System
             Backup a Transport Global
      extensive testing period.  It was not caught until it was released.
             Install Package(s)
       Select INSTALL NAME:   VAQ*1.5*34   Loaded from Distribution <date/time>
                              ==========
       Install Questions:
       Want KIDS to INHIBIT LOGONs during the install? YES// NO
                                                             ==
       Want to DISABLE Scheduled Options, Menu Options, and Protocols? YES// NO
                                                                             ==
       Enter the Device you want to print the Install messages.
       You can queue the install by enter a 'Q' at the device prompt.
      We're very sorry about that.
       Enter a '^' to abort the install.
       
       DEVICE: HOME// <It's up to you.  You may queue it if you wish.>
                      ------------------------------------------------
      6.  DSM Sites: After patch has installed, rebuild your map set, if
          necessary.
      ==========================================================================
      
      
    19. PATCH APPLICATION HISTORY:   33 SEQ #31
      DATE APPLIED:   2001-12-10 00:00:00
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      Patch VAQ*1.5*33
      group G.VAQ PDX ERRORS to inform them of this.
      
      NOIS WBP-0596-21007
      Test Site: Wilkes Barre, PA
      
      This patch ensures that incoming PDX messages are deleted from the server
      basket, whether they processed successfully or errored out.
      
      NOTE: This patch should be installed during off hours, when user activity
      is at a minimum.  It has no patch pre-requisites.
       
      ==========================================================================
       
      ROUTINES:
      The second line of the routine now looks like:
             ;;1.5;PATIENT DATA EXCHANGE;**[patch list]**;NOV 17, 1993
       
                   Before        After
      Name       Checksum     Checksum     Patch List
      -----------------------------------------------------------------
      VAQADM2     2534049      3075526     33
      NOIS SBY-0801-31431, FAV-1001-70165, COS-1001-40729, MAR-1001-20783
      * Checksums produced by CHECK^XTSUMBLD
       
      This patch introduces no new routines.
      ==========================================================================
       
      INSTALLATION:
      NOTE: This patch should be installed during off hours, when user activity
      is at a minimum.  It has no patch pre-requisites.
      1.  Users may be on the system during installation of this patch.
      2.  DSM Sites: If any of these routines is mapped, disable mapping for the
      Test Site: Salisbury, NC; Fayetteville, AR; Columbus, OH
          affected routine(s).  
      3.  On the PackMan menu, use the 'INSTALL/CHECK MESSAGE' option.
          This loads the patch into a Transport Global on your system.  
      4.  You do not need to stop TaskMan or the background filer.
          Users may be on the system.
      5.  On the KIDS:Installation menu, use the following options to install
          the Transport Global.
             Verify Checksums in Transport Global
             Print Transport Global
             Compare Transport Global to Current System
      
             Backup a Transport Global
             Install Package(s)
       Select INSTALL NAME:   VAQ*1.5*33   Loaded from Distribution <date/time>
                              ==========
       Install Questions:
       Want KIDS to INHIBIT LOGONs during the install? YES// NO
                                                             ==
       Want to DISABLE Scheduled Options, Menu Options, and Protocols? YES// NO
                                                                             ==
       Enter the Device you want to print the Install messages.
      This patch checks PDX requests from remote sites to ensure that the remote
       You can queue the install by enter a 'Q' at the device prompt.
       Enter a '^' to abort the install.
       
       DEVICE: HOME// <It's up to you.  You may queue it if you wish.>
                      ------------------------------------------------
      6.  DSM Sites: After patch has installed, rebuild your map set, if
          necessary.
      ==========================================================================
      site is not flagged as Closed in the Domain file.  If the Domain file shows
      that the site is closed, then the request is ignored, the message is
      deleted from the server basket, and a message is sent to the members of the
      
    DATE INSTALLED AT THIS SITE:   1996-07-22 00:00:00
DESCRIPTION
This module allows medical centers to exchange patient clinical and
administrative information through the use of MailMan.  Requests can
be sent to a remote site.  The remote site can process the request and
a message containing patient information will be returned.
FILE
  1. UPDATE THE DATA DICTIONARY:   YES
    ASSIGN A VERSION NUMBER:   YES
    MAY USER OVERRIDE DD UPDATE:   NO
    DATA COMES WITH FILE:   NO
    MAY USER OVERRIDE DATA UPDATE:   YES
  2. UPDATE THE DATA DICTIONARY:   YES
    ASSIGN A VERSION NUMBER:   YES
    MAY USER OVERRIDE DD UPDATE:   NO
    DATA COMES WITH FILE:   YES
    MERGE OR OVERWRITE SITE'S DATA:   MERGE
    MAY USER OVERRIDE DATA UPDATE:   NO
  3. UPDATE THE DATA DICTIONARY:   YES
    ASSIGN A VERSION NUMBER:   YES
    MAY USER OVERRIDE DD UPDATE:   NO
    DATA COMES WITH FILE:   NO
  4. UPDATE THE DATA DICTIONARY:   YES
    ASSIGN A VERSION NUMBER:   YES
    MAY USER OVERRIDE DD UPDATE:   NO
    DATA COMES WITH FILE:   NO
  5. UPDATE THE DATA DICTIONARY:   YES
    ASSIGN A VERSION NUMBER:   YES
    MAY USER OVERRIDE DD UPDATE:   NO
    DATA COMES WITH FILE:   NO
  6. UPDATE THE DATA DICTIONARY:   YES
    ASSIGN A VERSION NUMBER:   YES
    MAY USER OVERRIDE DD UPDATE:   NO
    DATA COMES WITH FILE:   NO
  7. UPDATE THE DATA DICTIONARY:   YES
    ASSIGN A VERSION NUMBER:   YES
    MAY USER OVERRIDE DD UPDATE:   NO
    DATA COMES WITH FILE:   YES
    MERGE OR OVERWRITE SITE'S DATA:   OVERWRITE
    MAY USER OVERRIDE DATA UPDATE:   NO
  8. UPDATE THE DATA DICTIONARY:   YES
    ASSIGN A VERSION NUMBER:   YES
    MAY USER OVERRIDE DD UPDATE:   NO
    DATA COMES WITH FILE:   NO
  9. UPDATE THE DATA DICTIONARY:   YES
    ASSIGN A VERSION NUMBER:   YES
    MAY USER OVERRIDE DD UPDATE:   NO
    DATA COMES WITH FILE:   NO
  10. UPDATE THE DATA DICTIONARY:   YES
    ASSIGN A VERSION NUMBER:   YES
    MAY USER OVERRIDE DD UPDATE:   NO
    DATA COMES WITH FILE:   YES
    MERGE OR OVERWRITE SITE'S DATA:   OVERWRITE
    MAY USER OVERRIDE DATA UPDATE:   NO
  11. FIELD:
    1. FIELD:   SPOOL DEVICE NAME
    2. FIELD:   SPOOL DEVICE NAME
    UPDATE THE DATA DICTIONARY:   YES
    ASSIGN A VERSION NUMBER:   NO
    MAY USER OVERRIDE DD UPDATE:   NO
    DATA COMES WITH FILE:   NO
  12. UPDATE THE DATA DICTIONARY:   YES
    ASSIGN A VERSION NUMBER:   YES
    MAY USER OVERRIDE DD UPDATE:   NO
    DATA COMES WITH FILE:   NO
    MAY USER OVERRIDE DATA UPDATE:   YES
  13. UPDATE THE DATA DICTIONARY:   YES
    ASSIGN A VERSION NUMBER:   YES
    MAY USER OVERRIDE DD UPDATE:   NO
    DATA COMES WITH FILE:   NO
    MAY USER OVERRIDE DATA UPDATE:   YES
  14. UPDATE THE DATA DICTIONARY:   YES
    ASSIGN A VERSION NUMBER:   YES
    MAY USER OVERRIDE DD UPDATE:   NO
    DATA COMES WITH FILE:   YES
    MERGE OR OVERWRITE SITE'S DATA:   OVERWRITE
    MAY USER OVERRIDE DATA UPDATE:   NO
  15. UPDATE THE DATA DICTIONARY:   YES
    ASSIGN A VERSION NUMBER:   YES
    MAY USER OVERRIDE DD UPDATE:   NO
    DATA COMES WITH FILE:   NO
    MAY USER OVERRIDE DATA UPDATE:   YES
  16. UPDATE THE DATA DICTIONARY:   YES
    ASSIGN A VERSION NUMBER:   YES
    MAY USER OVERRIDE DD UPDATE:   NO
    DATA COMES WITH FILE:   NO
  17. UPDATE THE DATA DICTIONARY:   YES
    ASSIGN A VERSION NUMBER:   YES
    MAY USER OVERRIDE DD UPDATE:   NO
    DATA COMES WITH FILE:   NO
  18. UPDATE THE DATA DICTIONARY:   YES
    ASSIGN A VERSION NUMBER:   YES
    MAY USER OVERRIDE DD UPDATE:   NO
    DATA COMES WITH FILE:   YES
    MERGE OR OVERWRITE SITE'S DATA:   OVERWRITE
    MAY USER OVERRIDE DATA UPDATE:   NO
  19. UPDATE THE DATA DICTIONARY:   YES
    ASSIGN A VERSION NUMBER:   YES
    MAY USER OVERRIDE DD UPDATE:   NO
    DATA COMES WITH FILE:   YES
    MERGE OR OVERWRITE SITE'S DATA:   OVERWRITE
    MAY USER OVERRIDE DATA UPDATE:   NO
POST-INITIALIZATION ROUTINE VAQPST01
POST-INIT COMPLETION DATE 1996-07-22 15:53:10
EXCLUDED NAME SPACE
  1. EXCLUDED NAME SPACE:   VAQZ